Bet
Translate
Nosso Canal Youtube
Tópicos mais visitados
Clique nos anúncios!
Últimos assuntos
Top dos mais postadores
WilsonM | ||||
andre fachini | ||||
icefly | ||||
PauloEduardo | ||||
dtyonline | ||||
pimenta59 | ||||
absilva | ||||
Mkdam | ||||
MRB | ||||
Alexandre |
Inscreva-se!
Nissan Frontier Desert Runner
Página 1 de 1
Re: Nissan Frontier Desert Runner
The name "Desert Runner" is familiar to fans of Nissan's popular mid-size pickup, the Frontier. As one of five available Frontier models, Desert Runner offers a special package of off-road style features in an affordable 4x2 configuration. But there has never been a Frontier Desert Runner like the one making its debut at the 2019 SEMA Show.
Under the hands of the experienced extreme performance specialists at MA Motorsports in Glen Arm, Md., working in tandem with the Nissan Motorsports team, this Desert Runner resembles the factory version in name only – going from weekend adventurer to near full-blown race truck.
The conversion started under the hood by replacing the factory 4.0-liter V6 engine with a 5.6-liter Endurance V8 from a Nissan TITAN full-size pickup. The big V8 underwent a complete race-spec rebuild, including the addition of a Garrett GTX3584RS turbocharger, custom intercooler, Jim Wolf Technology camshafts, pistons and valves, and MA Motorsports custom turbo header and exhaust system. The engine boasts 600-plus horsepower and 700 lb-ft of torque. The new V8 is matched to a Nissan 6-speed manual transmission with Jim Wolf Technology clutch and lightweight flywheel.
The suspension makeover is equally aggressive and includes a BTF Fabrication long travel front suspension kit, King Racing Triple Bypass front shocks and coil-overs, rear King Racing Triple Bypass shocks and Giant Motorsports Link Killer rear leaf springs. The Frontier Desert Runner rides on Fifteen52 TurboMac HD wheels and 37-inch BFGoodrich Baja T/A tires. The shock hoops, engine cage and bed cage were fabricated by MA Motorsports.
Turning attention to the body, MA Motorsports installed Fiberworx Pre Runner fenders and fabricated new front and rear bumpers, along with a custom spare tire carrier. A full package of off-road lighting from Rigid Industries and a body wrap by Speed Designs complete the bold exterior.
Inside, the factory interior was replaced by a no-frills cockpit – including coated floor, MA Motorsports custom harness bar and Sparco harnesses. Sparco also supplied the racing seats and steering wheel with quick release steering wheel adapter.
Under the hands of the experienced extreme performance specialists at MA Motorsports in Glen Arm, Md., working in tandem with the Nissan Motorsports team, this Desert Runner resembles the factory version in name only – going from weekend adventurer to near full-blown race truck.
The conversion started under the hood by replacing the factory 4.0-liter V6 engine with a 5.6-liter Endurance V8 from a Nissan TITAN full-size pickup. The big V8 underwent a complete race-spec rebuild, including the addition of a Garrett GTX3584RS turbocharger, custom intercooler, Jim Wolf Technology camshafts, pistons and valves, and MA Motorsports custom turbo header and exhaust system. The engine boasts 600-plus horsepower and 700 lb-ft of torque. The new V8 is matched to a Nissan 6-speed manual transmission with Jim Wolf Technology clutch and lightweight flywheel.
The suspension makeover is equally aggressive and includes a BTF Fabrication long travel front suspension kit, King Racing Triple Bypass front shocks and coil-overs, rear King Racing Triple Bypass shocks and Giant Motorsports Link Killer rear leaf springs. The Frontier Desert Runner rides on Fifteen52 TurboMac HD wheels and 37-inch BFGoodrich Baja T/A tires. The shock hoops, engine cage and bed cage were fabricated by MA Motorsports.
Turning attention to the body, MA Motorsports installed Fiberworx Pre Runner fenders and fabricated new front and rear bumpers, along with a custom spare tire carrier. A full package of off-road lighting from Rigid Industries and a body wrap by Speed Designs complete the bold exterior.
Inside, the factory interior was replaced by a no-frills cockpit – including coated floor, MA Motorsports custom harness bar and Sparco harnesses. Sparco also supplied the racing seats and steering wheel with quick release steering wheel adapter.
Página 1 de 1
Permissões neste sub-fórum
Não podes responder a tópicos
|
|
Hoje à(s) 7:40 pm por Pablolleo
» Retifica versa 3 cilindros
Hoje à(s) 1:28 pm por Augusto Machado
» Retifica versa 3 cilindros
Hoje à(s) 1:27 pm por Augusto Machado
» Manchas amarelas
Hoje à(s) 9:11 am por ROBERTO CESAR R SANTOS
» IPVA Seguro Kicks
Hoje à(s) 12:06 am por selestino
» Sentra 2023 B18
Ontem à(s) 6:32 pm por Spyr0Gir0
» Computador de bordo travado Sentra B17
Ontem à(s) 3:42 pm por Nilson Brito
» Oficina mecânica confiável em Goiania
Ontem à(s) 2:32 pm por WilsonM
» PROBLEMAS GRAND LIVINA 2012
Ontem à(s) 10:21 am por WilsonM